|
PROFESSIONAL AUTOCLAVE (FRONT LOADING)
Salient Features:
- Micro computerized control with LCD screen for messages and
With Unique
- Power failure memory : auto re-starts process on power
resumption.
- Versatile :
- 5 Fixed Programs allows any cycle: S, B, Universal or Prion
with option to Run Wet alone or Wet and
- Dry Cycle
- Different no. of pre – vacuum stages.
- 1 Program for Dry Cycle alone
- Checks water level
- 1 Custom Program: Protected by Password
- Programmable Parameters:
- Temp: 120 to 135 degC,
- Time: 00 to 59 mins.
- Pre Vacuum Stages: 1 to 3 for removal of incompressible
gases.
- User friendly:
- Programs start & complete process by minimum key presses
without supervision
- Displays “process over” message on completion
- Blinking light for user attention on message on screen
- help messages on screen
Construction:
Front Loading type for ease of operation
Robust construction: Stainless steel chamber with Powder
Coated Housing
Safety: process power configured in cut-off mode in its
steady state of rest.
Mechanical Safety valve in case of system failure
Ease of Servicing:
Self Diagnostic Software displays process fault on screen
e.g.: Sensor error, Heating not progressing
|
 |
|
SPECIFICATIONS |
Operating Voltage |
220 (or 110) Volts +/- 10%, 50 Hz, 1Phase |
|
Power Rating – Heater |
2000 Watts |
|
Control System |
Less than 50 Watts |
|
Water Filling |
Manual (Optional: Automatic) |
|
Water Removal |
Manual (Optional: Automatic) |
|
Chamber Size |
20 Liters Usable |
|
Control Type |
Micro-computerized control with LCD display. |
|
No. Of Fixed Programs |
5 Sterilization Cycles with option to run Wet or Wet & Dry Both
cycles; 1 Drying Cycle |
|
Custom Program |
1with Password Protection against un-authorized tampering and
Programmable: Temp: 120 to 135 Deg C. Time: 00 to 59 Mins Pre –
Vacuums: 1 to 3 |
|
Power Failure Memory |
Automatically re-starts selected Program on Power resumption |
|
Alerts Indication |
By Blinking Light |
|
Display |
2 x 16 Liquid Crystal Display (2 Rows x 16 Characters) |
|
Indication on Display |
- Program No & Name
- Cycle
- Actual Temp: Deg. C
- Time: Mins
- Help
- Process Alerts Process Over
|
|
Power On |
Displays Last Program and Cycle successfully completed |
|
Program Change |
By Up and Down Keys |
|
Vacuum System |
Built-in |
|
Reporting |
Total Time and No. of Power of Failures |
|
PROGRAM DETAILS |
|
Prog. No. |
Prog. Name |
Pre Vacuum
Stages |
Steri.
Temp
Deg C |
Steri.
Time
Mins |
Final Vac
Time
Mins |
|
1 |
Universal |
3 |
134 |
7 |
14 |
|
2 |
Quick B |
3 |
134 |
7 |
4 |
|
3 |
Quick S |
2 |
134 |
7 |
4 |
|
4 |
Gentle |
3 |
121 |
15 |
14 |
|
5 |
Prion |
3 |
134 |
18 |
14 |
|
6 |
Custom |
Programmable (2)
|
Programmable 121)
|
Programmable (16)
|
Programmable (10)
|
|
7 |
Dry |
1 |
121 |
16 |
NIL |
|
WHY PASSWORD?
To prevent tampering of Set Parameters by unauthorized persons. Password
is required to edit Custom Program only . Password is not required to
Run the Program with previously set values.
WHAT IF PASSWORD FORGOTTEN?
If the user has forgotten Password, then the default Password can be
loaded through Key Switch on the right face of the control panel. DESIGN & SPECS SUBJECT TO CHANGE WITHOUT NOTICE
|
