|
AUTOCLAVE – PROGRAMMABLE (TOP
LOADING)
- Micro Computerised control with LCD screen for messages and
With Unique
- Power failure memory : auto re-starts process on power
resumption.
User friendly:
- Single key press starts & completes process on its own
- Supervision not required
- Displays process over message on completion
- Blinking light for user attention on message on screen
- Help messages on screen
Protection from tampering of set parameters: Password
incorporated
- User programmable : Temp: 121 to 126 deg. C,
- Time: 15 to 59 mins
Safety valve. Pressure gauge.
- Drum size: 6” x 6”
- Automatic release of steam on completion of claving cycle
- Top loading cooker type construction for ease of operation
- Robust construction: Pressure Cooker Type.
- Safety: process power configured in cut-off mode in its
steady state of rest
- Versatility: permits stop & edit at any time during process
run
|
 |
|
SPECIFICATIONS |
|
Power Rating – Heater |
1000 Watts |
|
Control System |
Less than 50 Watts |
|
Water Filling |
Manual |
|
Operating Voltage |
230 Volts +/- 10%, 50 Hz, 1Phase |
|
Control Type |
Micro-Computerised control with LCD display |
|
Protection |
Password Protection against un-authorized tampering |
|
Memory |
Stores the process condition at power failure and continues on Power
resumption |
|
Alerts Indication |
By Blinking Light |
|
Temp Set Range |
121 to 126 Degree Centigrade |
|
Set Time Range |
15 to 59 Minutes |
|
Display |
2 x 16 Liquid Crystal Display (2 Rows x 16 Characters) |
|
Indication on Display |
- Set/Actual Temp in Deg. Centigrade
- Set Time in MM
- Process Alerts
- Process Over
|
WHY PASSWORD?
To prevent tampering of Set Parameters by unauthorized persons. Password
is required to edit Custom Program only . Password is not required to
Run the Program with previously set values.
WHAT IF PASSWORD FORGOTTEN?
If the user has forgotten Password, then the default Password can be
loaded through Key Switch on the right face of the control panel.
DESIGN & SPECS SUBJECT TO CHANGE WITHOUT NOTICE
|