HOME  |  KNOW US  |  PRODUCTS |  AUTOCLAVES  |  CLIENTS  |  LOCATE US  |  CONTACT US

PRESSURE POT (FOR HEAT CURE RESIN)

Print this page

PRESSURE POT (FOR HEAT CURE RESIN)   Indispensable unit for Porosity Free Polymerization of Heat Cure Resin in crowns and bridges Time saving. Performs process very fast at the press of a button. Micro controller based fully automatic unit Big screen for display of messages and menu Cost saving. 10 models can be cured at a time. Stainless steel curing chamber with Safety Valve and Pressure Gauge Pressure cooker construction for convenient loading and unloading of models. SPECIFICATIONS Construction Chamber Stainless Steel Chamber Sizes 8” (DIA) x 8” (H) Approx Water Filling Manual Power Rating – Heater 1000 Watts  Controller Less than 50 Watts Operating Voltage 230 Volts +/- 10%, 50 Hz, 1Phase Display Type 2 x 16 Liquid Crystal Display (2 Lines x 16 characters) No. of models accommodated Over 10 Curing Cycle: Control Micro Computerized with LCD Display Process Automatic Time Range 0 to 9 Mins 59 Secs Programmable Time Counting Downward Safety Mechanical Safety Valve – Auto Operated Manual Safety Valve Operating Pressure 1.5 to 2 Bar to be filled manually initially Pressure Display Needle type Pressure Gauge Screen Display 1) Help Messages, 2) Error Messages, 3) Process Over Process End Auto OFF with Message and release of pressure DESIGN & SPECS SUBJECT TO CHANGE WITHOUT NOTICE