PRODUCTS>Sand Blaster - Recycle     

Large blasting chamber with light

Two blasting nozzles :

     Hand pencil for micro (250 microns) sand  for ceramic work

     Fixed nozzle for macro (400 microns) sand for white metal work

Macro blasting with fixed nozzle recycles sand utilizing full abrasive strength.

Micro blasting done with hand held carbide nozzle.

Micro sand is filled in a jar outside chamber. Used sand falls within chamber which is once again recycled by macro blasting thereby allowing maximum utilization of the abrasive strength.

Hand switch to change  blasting mode: micro to macro and vice versa.

Provision for connecting dust extractor

Foot Switch operations.        

Operating Pressure 3 to 3.5 bars with pressure zone marked on the gauge.

OPTIONAL

Filter module for protection from dust (dust suction).

Specifications:

Construction                                   M. S. Powder Coated

Sizes  (approx)                               18” x  12” x  24”(H)                        

Working Pressure                           3 – 3.5 Bar

Max. Connecting Air Pressure      0 – 10 Bars

Power Supply                                 230 Volts +/- 10%, 50 Hz, 1Phase

Power Consumption                       8 / 10 Watts for lighting

Operation                                       By Foot Switch

Type                                               Recycling

No. of sand containers                   Two :

                                                       One jar for use with hand pencil

                                                       One chamber for re-cycling mode.

Blasting Nozzles                            Hand Pencil with carbide nozzle for jar

                                                       Fixed hardened steel nozzle for re-cycling chamber

Indication                                       Pressure Gauge with operating zone marked by color

DESIGN & SPECS SUBJECT TO CHANGE WITHOUT NOTICE