1.

ACRYLISER – LARGE: FOR 16 FLASKS.

MICRO COMPUTERISED WITH ALERTS FOR PROCESS ERRORS / OVER.  USER PROGRAMMABLE TIME  - TEMP CYCLE. PASSWORD PROTECTION. MEMORY TO CONTINUE ON POWER RESUMPTION AFTER FAILURE.

EMBEDDED TECHNOLOGY – PROCESSOR IDENTIFIES ITS OWN FAILURE AND DISPLAYS MESSAGE ON LCD SCREEN THE FAULT THEREBY EASY FOR MAINTENANCE AND REPAIRING. FULLY STAINLESS STEEL UNIT.

DENT_CURE

32,500.00

2.

ACRYLISER – SMALL: FOR 8 FLASKS MICRO COMPUTERISED WITH ALERTS FOR PROCESS ERRORS / OVER.  USER PROGRAMMABLE TIME  - TEMP CYCLE. PASSWORD PROTECTION. MEMORY TO CONTINUE ON POWER RESUMPTION AFTER FAILURE. EMBEDDED TECHNOLOGY – PROCESSOR IDENTIFIES ITS OWN FAILURE AND DISPLAYS MESSAGE ON LCD SCREEN THE FAULT THEREBY EASY FOR MAINTENANCE AND REPAIRING. FULLY STAINLESS STEEL UNIT.

DENT_CURE

26,500.00

3.

AUTOCLAVE - STD FOR SINGLE DRUM

CLAVE

7,500.00

4.

BURN FURNACE – STD: MICRO CONTROLLER BASED WITH HOLD TIME,  999 DEG. C, 5 PROGRAMES - EACH WITH 3 USER PROGRAMMABLE TIME TEMP (HOLD) STEPS AND INDEPENDENT RATE OF RISE FOR  EACH STEP. EDIT AND SAVE / RUN FEATURE. MEMORY TO CONTINUE ON POWER RESUMPTION AFTER FAILURE. M.S. POWDER COATED BODY. MUFFLE SIZE (APPROX): 4” X 4” X 8”

BURN_FUR (PROG)

30,500.00

5.

BURN FURNACE LARGE: MICRO CONTROLLER BASED WITH HOLD TIME,  999 DEG. C, 5 PROGRAMES - EACH WITH 3 USER PROGRAMMABLE TIME TEMP (HOLD) STEPS AND INDEPENDENT RATE OF RISE FOR  EACH STEP. EDIT AND SAVE / RUN FEATURE. MEMORY TO CONTINUE ON POWER RESUMPTION AFTER FAILURE. M.S. POWDER COATED BODY. LARGE MUFFLE SIZE (APPROX): 6 X 6 X 7”

BURN_LAR(PROG)

37,000.00

6

COMPOUND WATER BATH: FULLY STAINLESS STEEL, SIZE: 12” X 12” X 16” . APPROX 30 LTR CAPACITY WITH THERMOSTAT FOR TEMP RANGE 50 DEG C TO 99 DEG. C

COMP_BATH

9,500.00

7

CONST TEMP. HOT WATER BATH: FOR TOOTH MOVEMENT STUDY, WITH PROGRAMMABLE TEMP CONTROLLER  S.S. TANK, 18 X 18 X 18 IN. SIZE. PASSWORD PROTECTION, MEMORY TO RE-START ON POWER RESUMPTION AFTER POWER FAILURE EMBEDDED TECHNOLOGY – PROCESSOR IDENTIFIES ITS OWN FAILURE AND DISPLAYS MESSAGE ON LCD SCREEN THE FAULT THEREBY EASY FOR MAINTENANCE AND REPAIRING

BATH

20,500.00

8.

DENTAL CLAVE: PROGRAMMABLE TIME 15 MINS TO 59 MINS. TEMP 121 DEG C TO 128 DEG C,12 LTR CAPACITY. SAFETY VALVE AND PRESSURE GAUGE. MICROPROCESSOR CKT. LCD DISPLAY

DENTAL_CLAVE

15,500.00

9

DEWAXING UNIT MICRO COMPUTERISED CONTROL WITH ALERTS AND PROCESS OVER INDICATION. LCD SCREEN. PASSWORD PROTECTION TO PREVENT UNAUTHORISED TAMPERING OF SET PARAMETERS. PROCESS  PERFORMED AT SINGLE KEY PRESS. POWER FAILURE MEMORY TO AUTOMATICALLY CONTINUE  OR RE-START ON POWER RESUMPTION OF POWER. EMBEDDED TECHNOLOGY – PROCESSOR IDENTIFIES ITS OWN FAILURE AND DISPLAYS MESSAGE ON LCD SCREEN THE FAULT THEREBY EASY FOR MAINTENANCE AND REPAIRING. FULLY STAINLESS STEEL UNIT

DEWAX

22,500.00

10

DUAL BLASTER (RECYCLE TYPE) – large blasting chamber with light. 2 blasting nozzles for macro and micro blasting. Macro blasting done with fixed nozzle and recycles the sand fully utilizing the abrasive strength of the sand giving value for money spent on sand. Micro blasting – specially for ceramic work - done with fine hand held carbide nozzle. Micro sand is filled in a jar outside chamber. The used sand falls within chamber which is once again utilized by Macro blasting thereby allowing maximum utilization of the abrasive capacity. Pneumatic switch for changeover of micro to macro and vice versa blasting mode.

CLASSIC

19,500.00

11

DUPLICATOR: FOR STORING DUPLICATING MATERIAL AT CONSTANT TEMP IN MOLTEN FORM, 3 KG CAPACITY – COMPUTERISED CONTROL. STIRRER ON/OFF BY USER. FWD REV STIRRING. LOW SPPED AUTO STIRRING. UNIFORM HEATING LOW POWER HEATING TO PREVENT BURNING OF GEL MATERIAL.

DUBLITERM

52,000.00

12.

DUST SUCTION – FOR TECHNICIAN WORKSPACE AND ALSO AS INDEPENDENT ATTACHMENT TO LATHE, DIE-CUTTING ETC

DUST_SUCT

9,000.00

13

ELECTRIC CARVER  -  DUAL 2 Channels for 2 technicians to work simultaneously both having independent temp control. 5 tips – easy to remove and insert. Light weight carving pencil with flexible wire. Fast heating.

WACHS-DUAL

6,500.00

14.

ELECTRO POLISHER: fully electronic control with short circuit protection.

e POLISH

8,500.00

15.

HOT AIR STERILISER – MICRO COMPUTERISED CONTROL WITH ALERTS AND PROCESS OVER INDICATION. LCD SCREEN. PASSWORD PROTECTION TO PREVENT UNAUTHORISED TAMPERING OF SET PARAMETERS. PROCESS  PERFORMED AT SINGLE KEY PRESS. POWER FAILURE MEMORY TO AUTOMATICALLY CONTINUE  OR RE-START ON POWER RESUMPTION OF POWER. EMBEDDED TECHNOLOGY – PROCESSOR IDENTIFIES ITS OWN FAILURE AND DISPLAYS MESSAGE ON LCD SCREEN THE FAULT THEREBY EASY FOR MAINTENANCE AND REPAIRING

H.A.Ster

17,500.00

16.

HYDRAULIC PRESS:

PRESS

19,000.00

17.

LATHE HEAVY DUTY WITH SUCTION -  HEAVY DUTY – 0.5HP, 2800 RPM WITH BUR HODING CHUCK – M.S. ELECTROPLATED - ON ONE SIDE AND ACCESSORY FOR BUFFING WHEEL FIXING ON ANOTHER SIDE. HIGH POWER DUST SUCTION BEHIND CHUCK FOR CLEAN WORK ENVIRONMENT.  EYE GUARD FOR SAFE OPERATION. STAINLESS STEEL TRAY FOR DEBRIS COLLECTION. ALL MOUNTED ON HEAVY BASE PLATE WITH LIGHT

LATHE_SUC

36,000.00

18.

LATHE MACHINE - HD  -  HEAVY DUTY – 0.5 HP, 2800 RPM WITH BUR HODING CHUCK – M.S. ELECTROPLATED - ON ONE SIDE AND ACCESSORY FOR BUFFING WHEEL FIXING ON ANOTHER SIDE

LATHE_HD

9,500.00

19.

LATHE MACHINE - STD -  STANDARD – 0.25 HP, 2800 RPM, WITH BUR HOLDING CHUCK – M.S. PLATED - ON ONE SIDE AND ACCESSORY FOR BUFFING WHEEL FIXING ON ANOTHER SIDE

LATHE

5,500.00

20

MICRO BLASTER ( 2 - JAR) – 2 fine hand held carbide blasting tips – one for micro sand (up to 150 microns) and one for macro sand ( up to 250 microns). Light for good visibility. Pneumatic switch for changeover of micro to macro and vice versa blasting mode.

ULTIMATE

18,000.00

21

MODEL TRIMMER: SINGLE DISK

TRIMMER

12,500.00

22

PINDEX DIE SYSTEM – LASER DRILL SYSTEM REQUIRED FOR SPLIT MODEL TECHNIQUE. VERY ACCURATE DRILL POINT SETTING BY LASER LIGHT

PIN DIE

15,500.00

23

PLASTER DISPENSER, 10 Kg, AUTO, DISPENSING START/STOP BY TOGGLE SWITCH

PLASTER DISPENSER

18,500.00

24.

PRE HEATING FURNACE ; 500 DEG. C. MUFFLE SIZE4 X 4X 8” DIGITAL CONTROLLER PLUS INDICATOR

PRE_HEAT

8,500.00

25

PRESSURE POT - AUTO FACING MACHINE- Fully micro-controller based automatic unit for curing of acrylic for crown and bridge. Performs the complete process on its own without any manual interference. Help messages and action to be taken instructions displayed on LCD screen.

AUTOFACE

16,500.00

26

STEAM CLAENER – 3.5 BAR, APPROX 145 DEG. C STEAM GENERATED.

STEAMER

22,000.00

27

SUCTION APPARATUS -  FULLY MICRO COMPUTERISED OPERATION AND CONTROL. LOW NOISE MOTORISED SUCTION, SINGLE JAR INSIDE  BODY, AUTO ON/OFF, DRAIN AND FLUSH WITH A MICROSWITCH ATTACHMENT WHICH CAN BE FITTED ON CHAIR_SIDE.  M.S. POWDER COATED BODY.

SUCTION (auto drain)

15,000.00

28

TECHNICIAN’S WORK STATION – 3 X 2 FT, M S POWDER COATED BODY WITH STAINLESS STEEL OR GRANITE TOP, 2 SIDE DRAWERS,  2 THIN CENTRE DRAWERS ONE FOR INSTRUMENTS AND OTHER FOR DEBRIS COLLECTION WITH TRAY, POWERFUL DUST SUCTION, 2 ELECTRIC POINTS, ELECTRIC CARVER DUAL CHANNEL WITH 4 TIPS, CONNECTION FOR COMPRESSED AIR AND BURNER, ONE RACK. LIGHT ARRANGEMENT AND A RACK

OPTIONAL:  MINI POLISHING LATHE WITH TRAY – FITTED ON THE TABLE

TECH_AT_WORK

32,000.00

5,500.00

29

ULTRASONIC CLEANER – FULL STAINLESS STEEL, HEATER  AND MICROPROCESSOR BASED TIMER, 1.5 LTR TANK CAPACITY

ULTRACLEAN

13,500.00

30

VACUUM MIXER PROGRAMMABLE:  MICRO PROCESSOR BASED WITH PROGRAMMABLE PRE-MIX, MIX AND POST-MIX TIME, FULLY AUTOMATIC, HANDS FREE OPERATIONS. FIVE PROGRAMS WITH EDIT AND SAVE / RUN. CAN RUN ONE CYCLE FOR TRIAL OF NEW INVESTMENT / PLASTER MATERIAL OR PERMANENTLY SAVE NEW PROGRAM. LCD SCREEN DISPLAYS HELP MENU AS WELL AS PROCESS RESULT.

VACU_STIR

 (MP-5P)

32,500.00

31

VIBRATOR  HEAVY DUTY

VIBRA_HD

5,5000.00

32

X-RAY VIEWER – STD

X-VIEW

1,800.00